bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Ram ProMaster City


  • Will the Surco Safari Roof Baskets Work with Rola Roof Rack Crossbars
  • I do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
    view full answer...

  • Kayak Carrier to Fit on Thule ProBar Roof Rack
  • I do have a kayak carrier solution for you to use with the Thule ProBars but the clamps for the Yakima Kayak Carrier with Tie-Downs # Y04083-04082 won't fit. Instead we have the Malone SaddleUp Pro Kayak Carrier with Tie-Downs # MPG1001 which mount in the tracks if you are really wanting the saddle style carrier. This is the only saddle style carrier that is compatible. I personally like the Lockrack Adjustable Watersport Carrier # LR54FR instead because it mounts in the T-Slots but it...
    view full answer...

  • Which Yakima MightyMounts Will Fit the Rola APE Series Crossbars?
  • Rola's (Discontinued) 59633 crossbar dimensions are 3-1/8 inches wide by 1 inch tall so you will want the Yakima MightyMounts # Y03590. Which accept crossbars less than 4 inches wide or 1-1/2 inches tall. I have linked both products to this page for your convenience.
    view full answer...

  • Does the VanRug VRDPC14 Fit a 2021 RamProMaster City
  • I was able to confirm that the VanRug #VRDPC14 does in fact fit the 2021 Ram ProMaster City van, so it's just what you're looking for.
    view full answer...

  • Do Cargo Mats for 2020 Ram ProMaster City Cover Entire Rear of Van
  • Yes these cargo mats do extend all the way from the rear of the van to the front seats on your 2020 Ram ProMaster City. The mats you are finding could be just for the passenger-type vans as opposed to the cargo vans, and these mats are designed specifically for the cargo vans. Both of these cargo van floor mats fit your 2020 ProMaster City, and you can choose from the softer carpet style or the firmer thermoplastic. - VanTred Custom Floor Mat for Cargo Vans - Black - Thermoplastic # VTDCP14 -...
    view full answer...

  • How to Tell if Malone BigFoot Canoe Carrier T-Slot Kit Will Fit Roof Rack Channels
  • The Aero Style Crossbar T-Slot Fit Kit # MPG915, for the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD, comes with T-Nuts that measure 1" long x 3/4" wide x 3/16" tall. If you can confirm this will fit inside the channels on your roof rack you'll be good to go!
    view full answer...

  • Is There a Floor Mat For a 2022 Ram ProMaster City That Covers The Entire Rear of The Van?
  • The VanRug Custom Floor Mat for Cargo Vans # VRDPC14 will cover the entire cargo area of your 2022 Ram ProMaster City. The mat is custom cut and extends from the back of the front seats to under the cargo doors plastic shroud. This is a 3/4" thick, closed-cell foam polypropylene mat that will provide you with some cushioning as well as protection for the floor. It will not absorb liquids and will not become damaged from oil, bleach and even battery acid.
    view full answer...

  • How To Choose Between A Roof Rack And Ladder Rack On A 2016 Ram ProMaster City
  • I do have an option that will allow you to carry both elongated items and rooftop mounted accessories on your 2016 Ram ProMaster City, however, the TracRac TracVan ES Van Ladder Rack part # TH29616XT has crossbars thats are much too big for most roof rack accessories. Therefore, I recommend using the Yakima CoreBar Crossbar System part # Y00421, part # Y00148, and part # Y00233 as this roof rack system has a weight capacity of 165 lbs. In addition to weight capacity, the aero crossbars...
    view full answer...

  • Recommended Wiring Harness Kit for Towing with a 2018 Ram ProMaster City
  • Yes, we do! The wiring kit I recommend purchasing to use with your Draw-Tite # 75219 on your 2018 Ram ProMaster City is the Tekonsha T-One # 118719. This plugs in behind your tail lights and draws power from your battery via the black wire. This bypasses all of the wiring on your ProMaster City so that if anything goes wrong with the wiring on your trailer it won't backfeed into your new vehicle. You also need a ball mount, hitch pin & clip, and a hitch ball to complete your towing setup....
    view full answer...

  • Recommended 7-Way and Brake Controller for a 2017 Ram ProMaster City
  • Sounds like you need a 7-way connector and a brake controller for your 2017 Ram Promaster City. I will be happy to help you find the right parts. To add a 7-way connector to your utility van you're going to need two separate wiring harnesses because no one made just a 7-way connector for it. The first harness you will need is the, previously recommended, Curt 4-Way Wiring Harness item # C56270. This harness is custom fit and installs behind your rear tail lights and inside the door frame....
    view full answer...

  • What T-Slot Accessories Will Fit MaxxTow Ladder Rack MT70423
  • The T-slot in the MaxxTow ladder rack MT70423 will accept accessories from any manufacturer that uses T-slots for mounting. That includes the Thule load stops # 753-3761. If you can tell me what accessories you are interested in I can make specific recommendations.
    view full answer...

  • How To Power A MaxxAir MaxxFan Dome Roof Vent With A Wattfun Power Pack 12v Outlet
  • To connect your MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B to your Wattfun Power Pack 12v outlet you would just need some 16 gauge wire and would need to splice the wire to the fan and to a 12v male plug. To make it easy you could just cut the female end of the NOCO Extension Cable with 12V Plug - 12' Long # 329-GC019 and splice it to the fan. This would allow you to easily plug into the power pack 12v outlet and only have to make one connection with the wiring.
    view full answer...

  • Can Holes Be Cut in the VanTred Custom Floor Mat to Accommodate Tie Downs in 2017 Ram ProMaster City
  • I have a solution for you, but the VanTred Custom Floor Mat for Cargo Vans # VTMM16 and other comparable bed mats are not available with cut outs manufactured in them to accommodate the tie downs on the floor of your 2017 Ram ProMaster City. With that said, even though thermoplastic is relatively hard, you can cut clean holes in it using a fine toothed carbide tip saw blade or cutting wheel. You may even consider drilling a hole and then using a dremel tool to cut out the spots for the...
    view full answer...

  • How Far Out Does the Draw-Tite Hitch Stick Out From the Bumper On a 2017 Ram ProMaster City
  • The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75219 which is a fit for a 2017 Ram ProMaster City installs behind the rear bumper beam and the receiver tube is behind the rear bumper fascia therefore you should not have any issues with clearance so long as the wheel chair lift does not interfere with the rear bumper. I am not sure what specific measurements you are looking for but if you can specify this I would be glad to see if these measurements are available or I can take them...
    view full answer...

  • Could Rear Doors of 2017 Ram Promaster City Open Into Let's Go Aero ArcHaus tent # SAR024-031
  • I believe it would, but you'd need to take some measurements to confirm if the Let's Go Aero ArcHaus tent # SAR024-031 could fit over the rear doors of your 2017 Ram Promaster City. The overall height of this is 6-1/2 feet tall and the width at the base of the arch is 10 feet. If the top of your ProMaster doors are lower in height than the 6-1/2 foot height of this tent most likely they'd open.
    view full answer...

  • Will the Malone Profile 18B Cargo Carrier Fit on My 2022 Ram ProMaster City
  • Since the Malone Profile18B Rooftop Cargo Box # MPG911 can be adjusted on the crossbars there is not a set number for how much clearance is needed since it can change. What can be said is that since you have a 35" crossbar spread this box will work great with your current setup and if I'm being honest if you're not using the rearmost crossbar for anything I'd just use the back two crossbars and not worry about it. Also, this box measures 78-3/4" long x 32-3/8" wide x 15-3/4" tall so...
    view full answer...